Connectivity:
Video Input: 4 analog video inputs
Video Output: 4
loop-through outputs
Alarm Features:
Motion Detection with
Percentage and Sensitivity: Yes
Daily Repeat Timing Schedule: Yes
3
Color Images per Camera for Pre/Post Alarm: Yes
Automatic Transfer of Stored
Images via Email or FTP: Yes
System:
CPU: Trimedia PNX1300
RAM:
16MB SDRAM
ROM: 2MB FLASH ROM
Video Specifications:
Algorithm
Supported: MJPEG
NTSC Resolution 704x480 (4CIF): Up to 9 frames
NTSC
Resolution 352x240 (CIF): Up to 30 frames
NTSC Resolution 176x112
(QCIF): Up to 30 frames
NTSC Resolution for Quad: Up to 9 frames
PAL
Resolution 704x576 (4CIF): Up to 8 frames
PAL Resolution 352x288 (CIF):
Up to 25 frames
PAL Resolution 176x144 (QCIF): Up to 25 frames
PAL
Resolution for Quad: Up to 8 frames
Networking:
Ethernet: 10baseT or
100baseT fast ethernet auto negotiation
Protocol: TCP/IP, HTTP, SMTP, FTP,
Telnet, NTP, DNS and DHCP
Modem: PPP (dial-up, direct-cable connection)
General IO:
Sensor Inputs: 4 sensor inputs max. 12V DC 50mA
Relay Outputs: 2 relay outputs max. 24V DC 1A / 125V AC 0.5A
Pan/Tilt/Zoom:
Multiple PTZ Camera Control Through RS232 or RS485:
Yes
CGI Command Serial Driver: Supported
Supported Devices and
Protocols: Sony VISCA, Canon VC-C1, VC-C3, VC-C4, Dynacolor DynaDome, Pelco D,
LiLin, Ernitec
Power:
Consumption: Near 7.8W
Input: 100 ~ 240V
AC, 50/60 Hz, 0.4A
Output: 12V DC, 1.5A
Operating Environment:
Operating Temperature: 0 ~ 65 (32~ 149)
Operating Humidity: 95%
RH
|
|
