Local Record
and Playback
First make sure the peripheral equipments
are linked correctly, the terminal settings are all right,
choose one of
the sixteen channels for control, no matter the local server is in single menu
or
sixteen menu
mode, once it’s under ”selection”, you can control the vidicon through the
external
control button
to carry out the operation like “Up、Down、Left、Right、
Auto、Light、Wiper、Preset、Recall、Camera
lens(Iris、Focus、Zoom)
regulation”.
- Switch of Auto、Light、Wiper:
the left key is open, right is stop. It’s possible the right one is open,
left is stop, as
part of the decoder receive command differently. Please operate according to the
locale fact.
- Preset、Recall:
Press “preset” or “recall”, fig. input will appear under the button, type in
the right position,
press
『Preset』or
『Recall』again
to confirm.
- Note:
The precondition of the peripheral control is that the decoder must support the
deferent command.
- Because of the
delay of data transmission on the network, the control impact may not
reflect immediately on the Digital Surveillance Center, the
users may use single mouse key to operate in order
to get better impact.
