Google
 

Home | Product | Solution |Purchase | contract-us

¡¡
¡¡
Cradle Head or Dome Camera Can Not be Controlled

    

  Possible Cause: The cradle head protocol, baud rate and address are not accordant with those of the used cradle head or dome camera.

  Solution: Enter into the setting page to change the cradle head protocol, baud rate and address into those of used cradle head.

  Possible Cause: The signal wire is poor connected or incorrectly connected.

  Solution: Connect the control wire of cradle head or dome camera and server again.

¡¡


¡¡

Recent Post:

¡¡

IP/Network camera server/Wireless Network Camera/Knowledge Articles: