4 Analog Video Input, MJPEG Video Compression, Generic I/O Ports, Remote PTZ control, Modem Support, Built-in web server, In-image motion detection, 4-Channel IPNV4 Software


4XEM's IPVS4 Quad Channel MJPEG IP Network Video Server connects four analog CCTV video camera to an IP network. It protects your investment in CCTV Video by allowing you to either upgrade your existing analog camera CCTV Video System to gain the benefits of an IP Network Video System, or by including existing analog CCTV cameras in an expanded IP Network Video System.

Features and Benefits:

 High performance and fully configurable MJPEG compression engine
 PPP dial-in and dial-out via external modem
 Remote P/T/Z camera control
 Flexible integration interface
 4 analog camera inputs, 4 analog video outputs
 Video stream 30/25 frames/sec for Single Input, 6 frames/sec for Quad Input
 TCP/IP network remote video surveillance system
 Built-in web server
 In-image motion detection
 4 Channel IPNV4 Security and Remote Monitoring System Software

Technical Specifications:

Connectivity

 Video Input: 4 analog video inputs
 Video Output: 4 loop-through outputs

Alarm Features

 Motion Detection with Percentage and Sensitivity: Yes
 Daily Repeat Timing Schedule: Yes
 3 Color Images per Camera for Pre/Post Alarm: Yes
 Automatic Transfer of Stored Images via Email or FTP: Yes

System

 CPU: Trimedia PNX1300
 RAM: 16MB SDRAM
 ROM: 2MB FLASH ROM

Video Specifications

 Algorithm Supported: MJPEG
 NTSC Resolution @ 704x480 (4CIF): 9 frames
 NTSC Resolution @ 352x240 (CIF): 30 frames
 NTSC Resolution @ 176x112 (QCIF): 30 frames
 NTSC Resolution for Quad: 9 frames
 PAL Resolution @ 704x576 (4CIF): 8 frames
 PAL Resolution @ 352x288 (CIF): 25 frames
 PAL Resolution @ 176x144 (QCIF): 25 frames
 PAL Resolution for Quad: 8 frames

Networking

 Ethernet: 10baseT or 100baseT fast ethernet auto negotiation
 Protocol: TCP/IP, HTTP, SMTP, FTP, Telnet, NTP, DNS and DHCP
 Modem: PPP (dial-up, direct-cable connection)

General IO

 Sensor Inputs: 4 sensor inputs max. 12V DC 50mA
 Relay Outputs: 2 relay outputs max. 24V DC 1A / 125V AC 0.5A

Pan/Tilt/Zoom

 Multiple PTZ Camera Control Through RS232 or RS485: Yes
 CGI Command Serial Driver: Supported
 Supported Devices and Protocols: Sony VISCA, Canon VC-C1, VC-C3, VC-C4, Dynacolor DynaDome, Pelco D, LiLin, Ernitec

Miscellaneous

 LED Indicators: System power and status indicators, Network link and speed indicators

System Requirements

 Operating System: Microsoft Windows 98SE/ME/2000/XP
 Browser: Internet Explorer 4.x or above, Netscape Navigator 4.x or above

Bundled Software

 IPNV4 Software
- Remote configuration and control of 4 devices
- Fast/slow forward replay and pause
- Scheduled backup
- Event-triggered, scheduled, manual recording
- Instant search with preview windows
- Hard disk quota warning
- AVI format export