Imaging sensor: 1/3" CMOS                           
CMOS total pixels: 628 x 582 (PAL) 510 x 492 (NTSC)                      
Horizontal resolution
View angle: 62 degrees                                  
Minimum illumination: 1.5lux / F1.5                    
Gain control: automatic                                
Weight: 20g                                   
Battery clip

QH-100A/B packing:
0.325kg/pc
Carton dimensions: 12.2 x 8.1 x 6.1cm
20 sets/ctn           
N.W.: 6.5kg      
G.W.: 7.1kg
Dimensions: 32.2 x 26.2 x 18.0cm
                             
High-sensibility wireless camera and receiver 2.4g
Operation manual:
Connect the antenna to the receiver
Connect the receiver output to the monitor with AV wire
Plug power jack of DC power supply (9V, 12V, 500mA) into the receiver power socket
(the power indicator is on)
Plug power jack of DC power supply (5V, 8V, 500mA) into the camera power socket (battery of the same voltage is acceptable)
Tune to the desired position (until the image of wireless camera is received)
Adjust the camera lens to the best position
Suitable for household, companies, shops, and factories
Image pickup: 1/3, 1/4
TV system: PLA/CCIR NNTSC/EIA
Definition: 380 TV lines
Scan frequency:
PLA/CCIIR: 50Hz
NTSC/EIA: 60Hz
Min. illumination: 1.5lux
Output power: 200mW
Output frequency: 2,400MHz
Camera power: 8V DC
Receiver power: 9/12V DC