About-network-video:
video-solution:
Related-links:
|
| Samsung's SCC-643N, PTZF corresponding SUPIDODOMUKAMERA
|
|
SCC-643, tilting pan to allow remote-controlled zoom and focus of the
Samsung-made KONBINESHONDOMUKAMERA.
CCD imaging device has 41 million
pixels (effective pixel: 768 ¡Á 494 pixels) SONY Super HAD CCD while the
horizontal resolution of high-resolution 480 TV to achieve this.
The
basic design emphasis on performance, low light shooting under low light to
allow the monitoring function on the spot depending on the nature of
illumination, more accurate color reproduction features white balance, strong
conditions are subject to retroactive Retrograde and reflect a sharp correction
on the screen in any area of privacy zone masking function at night or under low
light sensitivity of black-and-white camera switches to raise the Night Mode
(selected monochrome 0.005 Lux), the focus will always be mobile Fit auto-focus
camera functions such as security monitoring of important basic features are
built into all. The remote control interface for RS-422A/485 (half /
full-duplex) with the pan tilt and zoom controls are the focus of the DVR and
PC, controller (SCC-1000), etc. Easily achievable, up to 128 units in the
corresponding control.
SCC-643N Major Features adoption of Sony-made
Super HAD CCD 1 / 4 inch 410,000 pixels Sony Super HAD CCD with the
horizontal resolution 480 TVLines to achieve a very high-quality images can be
obtained. Also, when the color illumination from 0.02 Lux/F1.2 (electronic
sensitivity up 128 times) to achieve low light is also supported under the
supervision of a high-sensitivity specifications. Implementation of advanced
digital signal Video signal processing, high-speed processing ability of
highly reliable advanced digital signal Prosser (DSP) and 10-bit A / D converter
conversion adopted, a stable, high-speed digital video processing to achieve ,
Brings high-quality overwhelming. With 22 times optical zoom lens No
image degradation 22 times the area of optical zoom range (f = 3.9 ~ 79.2mm) to
provide the digital zoom range of 10 times in the region to implement the
magnification of up to 220 times. Night mode provides Shooting under low
light, color photography IR filter to remove non-choice of black and white
photography, from illumination to 0.005 Lux (electronic sensitivity up 128
times) until you can drive. CAMERA SET menu COLOR / BW items COLOR / BW
/ AUTO selected from the Select 3 COLOR: IR filter is ON, usually in color
mode BW: IR filter is OFF, black and white shooting mode AUTO: Auto low
light when the filter is in the IR OFF mode in black and white, and bright, ON
IR and the filter is usually color mode. sensitivity of black-and-white color
switch, LOW / MEDIUM / HIGH choose from. Ultrafast PAN / tilting
control provision At the time of manual controls, PAN MAX 90 ¡ã / sec
(0.8 ¡ã ~ 90 ¡ã 64 stages), tilting MAX 45 ¡ã / sec (0.8 ¡ã ~ 45 ¡ã 64 stages), when PURISETTOMODO
PAN MAX240 ¡ã / sec. , Tilting MAX150 ¡ã / s and the high-speed
operation. The PAN range of 360 ¡ã (Endless), tilting range of 0 ¡ã ~ 90 ¡ã
wide range of control. With auto-focus feature Mobile screen in
INTERIJENTOOTOFOKASU to continue focusing on features. As a result, high-speed
zooming and pan / chill during the operation to minimize the shift in focus to
prevent it. To provide remote control SCC-643N, the remote control to
allow the equipment on the RS-422A/RS-485. This will only SCC-1000 controllers
and multi-cam 2, DVR, zoom and other KUODOPUROSESSA 1 (Tele / Wide), Focus
(Near / Far), Iris (Open / Close), PAN, tilting operation . 1)
SCC-643N in order to control the built-in controls for the driver must have. For
more information, please contact us. 2) currently serving a multi-cam
remote. SCC-643N features of the PTZ please try again later.

GV-650 multi-cam and the core of
half-duplex configuration, SCC-643N ¡Á 4 units of the remote control system. Last
camera (CAMERA ID-4) terminations are ON (SW-1) must be. Motion detection to
provide MOTION DET menu dynamic detection, dynamic detection sensitivity,
dynamic range detection settings. ON element to set the detection, the camera's
dynamic intrusion detection in the area to capture the movement of the
controller to transmit an alarm signal.
Alarm I / O blocks provide
The alarm input and output I / O terminal block four alarm inputs and
outputs consisting of three alarms as well. Alarm input from external sensors to
detect the features and patterns with presets for alarm output signal caller.
SCC-643N, the alarm signal is one of more than 150 ms when the alarm signal and
continued recognition. In addition, an alarm activated when the time is inspired
preset settings and set the pattern set by the value of the item at the
decision.
Other features *is all set to screen GUI interface
allows a maximum of 128 units until the adoption *identifiable ID number
allocation accepted *V-SYNC (adjust the vertical sync signals) feature *IRIS / ALC / BLC / SHUTTER documentation can be configured More

Model No.
SCC-643N (Zoom lens single body COMBI DOME CAMERA) Power AC 24V ¡À 10% (60Hz
¡À 0.3Hz) Power 18W TV system NTSC STANDARD COLOR SYSTEM Imaging
device 1 / 4 inch IT CCD Effective pixels 768 (H) ¡Á 494 (V) Scanning
system 525 Lines, 2:1 Interlace Frequency (horizontal and vertical)
Horizontal: 15, 734 Hz (INT) / 15, 750 Hz (L / L), Vertical: 59.94 Hz (INT) / 60
Hz (L / L) Synchronous INT / LINE LOCK Horizontal resolution and 480 TV
LINES S / N ratio of 50dB or less (AGC OFF) Illumination from 1 lux (AGC
Max, Sensitive x2 up) White balance ATW / AWC / MANUAL MODE (3200K, 5600K, R
/ B GAIN Court) Signal output COMPOSITE VIDEO OUT: 1.0 Vp-p 75 ohms / BNC
22X zoom lens with a focal length: 3.6 to 79.2 mm, Aperture: F1.6 (Wide),
F3.8 (Tele), Auto Focus PAN function PAN range: 360 ¡ã Endless, Preset Pan
Speed: 240 ¡ã / s maximum, Manual Pan Speed: 0.8 ¡ã ~ 90 ¡ã / s (64Step) TILT
functions TILT range: 0 ¡ã ~ 90 ¡ã, Preset Tilt Speed: 150 ¡ã / s maximum, Manual
Tilt Speed: 0.8 ¡ã ~ 45 ¡ã / s (64Step) Remote-controlled Tele / Wide (ZOOM),
Near / Far (FOCUS), Iris Open / Close, Pan / Tilt Alarm Alarm Inputs: 4 IN
(5mA Sink) - Alarm Outputs: 3 OUT (Open collector: 2 DC24V 40mA Max, Relay: 1,
NO, NC, COM 2A 30VDC, 0.5A 125VAC Max) Operating temperature range of 14 ¡ã F
~ 122 ¡ã F (-10 ¡æ~ +50 ¡æ And 90% humidity External size DOME: ¦µ147 mm,
Outline: ¦µ59.5 x 176 (H) mm, Adapter: 23.5 (H) mm 2kg weight
Related Product: V-series IP/Network Cameras
Articles: IP/Network camera server/Wireless Network
Camera/Knowledge
|
| |
|
|