Google
 

Home | Product | Solution |Purchase | contract-us

¡¡
¡¡
StarDot Express 6 Video Server

¡¡
¡¡
¡¡
Standalone Operation

Does not require a dedicated PC in order to operate -- The Express 6 video server is a true standalone device that plugs directly into a network or modem.

Six Video Inputs

One Express 6 can stream video and images from up to six video cameras. This is 50% more than most competitors.

IP-Addressable

Video streams and configuration menus can be viewed from anywhere by simply entering the IP address in a web browser.

Password-Protected

Configuration menus and video streams are username/password protected to prevent unauthorized access.

Browser-Based

No special software or downloads are needed to access the Express 6. Any java-enabled web browser can be used, including browsers on Windows, MacOS and UNIX/Linux.

Triggered Smart Capture

A sequence of images can be uploaded or e-mailed based on a triggered event (alarm system, motion detector, door sensor, etc.), including both pre- and post-alarm images.

Built-In FTP Client

The Express 6 can be programmed to upload images to your web server based on the schedule you set. Each video input's upload schedule is independent.

Date/Time

Auto network time synchronization or manual time set. Time/Date and custom text is printed on live image, flexible font color and positioning.

Specifications

Image Compression

Industry Standard JPEG & MPEG-1

Frame Rate

Up to JPEG 10 FPS, MPEG 30 FPS

Resolution

NTSC: 702x480, 352x240, 176x120
PAL: 704x576, 352x288, 172x144

Video Inputs

6 x BNC composite video signals w/75ohm termination (selectable), NTSC, PAL or SECAM, RCA type adapters available, four of six inputs can be combined to allow 2 x S-VIDEO sources

Video Decoder

Adaptive 2/4-line comb filter for two dimensional chrominance/luminance separation resulting in increased luminance and chrominance bandwidth for all PAL and NTSC standards as well as reduced cross color and cross luminance artifacts

Pre/Post Alarm Buffer

Up to 1.8MB available for pre- and post-alarm buffer image storage (or 180 10KB images)

Network Connection

1 x 10-baseT Ethernet

CPU

Motorola Coldfire 5407, 162MHz

Internal Operating System

uClinux

Network Protocols Supported

TCP/IP, HTTP, FTP, DHCP, ARP, PING, TELNET, DAYTIME, NTP, SMB, NFS

Serial Connection

2 x RS-232 Ports, DB9, up to 115.2Kb/sec

I/O Connectors

4 x Digital Alarm Inputs
   or
4 x 5V Swing Output Pins
1 x Fully Isolated Relay, 2A@5V or 0.5A@28VDC
Output is 5VDC@50mA

Memory

16MB DRAM, 2MB Flash Memory

Security

Separate password-protected user accounts for administering the server and viewing the images, additional user accounts can be added

Operating Temperature

-4°F to +120°F (-20°C - +49°C)

Dimensions

9.1" wide (231 mm) x 1.8" high (46 mm) x 6.65" deep (168.5 mm)

EMI Approval

FCC Class A, CE (EN55024/1998, EN55022/1998)

Power Requirements

8VDC - 15VDC (500mA@12V)

Network camera server:

Network camera:

¡¡

¡¡