Mesh network camera WEBCAM 510 is a traditional camera and network technology
produces a new generation of video images, it can be through the network to the
other side, and distal visitors needs no any professional software, as long as
the standard web browser (such as "Microsoft IE or Netscape), can monitor the
images.
1, integrated ADSL automatic dial-up function, can be easily to realize
the remote control
2, embedded LINUX operating system
3, without any software, remote monitoring by IE browser
4, induction, and monitoring of infrared
5 and support alarm input and dynamic detection alarm
6 and external usb, direct admission alarm image
7 and performance of the centralized management software to complete
Mesh network camera WEBCAM 510 performance data
Webcam 510
Hardware CPU 240 the MIPS Processor 32bit RISC
Flash 16Mbyte with Memory
32Mbyte DRAM
Embedded OS Linux operating system
TCP/IP network protocol, an ARP, FTP, SMTP, DHCP, HTTP
Ethernet LAN interface (10/100 Base - T) Cable Modem
64 X 48 image, 320 X 24
The image compression Motion JPEG lossy JPEG, manner
Level 3 to Low and High, that (the),
The highest rate of 30 frame (single point),
Camera modes
Factory-style NTSC (optional) PAL
Photographic CMOS chip 1/3 "VGA induction ir
Sensitivity at least 0.1 Lux
48dB signal-to-noise ratio
Resolution 300,000 pixels
Remote control WBC, AGC/BLC/On/Off Flickerless mode
Backlight compression On/Off hire those knowledgeable programmers
Through the LAN port software upgrades can upgrade
Security password protection
Optional: "IP Filtering dura Encryption
Alarm Digital input/output to GND (1 input, alarm1) 1 Out, NC),
Network interface RJ - 45
Pan/Tilt Remote Control complex modulation Zoom /
1 to provide local PCMCIA USB storage
Video detection can be lost
Dynamic detection
850mA DC12V Power: 10%
Environmental temperature ∑ 0 C ~ 50 ∑ C, the 90% RH
Size 81 (W) x 131 (L) x 80 (H) mm
180g weight
Related Product:
¡¡
|
|
